D.I.Y METALLIC EPOXY
Make sure your surface is flat and clean and free of dirt, dust or any other contaminate to make sure this will not affect the final product. Sweep any dirt, sand, or drywall.
When your surface is clean apply a water-based primer to the surface. Allow area to dry before continuing on to the next step.
Mix the metallic epoxy additive to the correct amount of 2 part A and one part B solids epoxy. 1 pigment pack should be added to 1 1/2 gallon kit of epoxy.
Mix thoroughly for 3 minutes to ensure proper dispersion.
Apply the epoxy to the concrete with the use of a trowel.making sure to give the space an even coating.
Allow the epoxy to sit for 5-6 hours to dry
Look for excessive bubbling. Sand the area to smooth out the bubble this will create small craters and orbs but they will give the floor characters that make them unique and one of a kind
Follow through with your choice of sealer
WE ARE NOT RESPONSIBLE FOR USER ERROR OR APPLICATION PROCESSING ERRORS! LIMITED GUARANTEE FOR DEFECTIVE PRODUCTS!
No comments:
Post a Comment