How To Use Our Epoxy

100% Solids Epoxy
High Performance Epoxy 100
Parts A & B

How To Use:
Measure by volume. Mix 2 part of Part A to 1 Part B in a clean, dry mixing container that is twice the volume of the epoxy being mixed. The two components A&B must be stirred and mixed thoroughly, making sure that the bottom and sides of the mixing container are well scarped during mixing. Under mixing will result in soft spots in the finish. Longer mixing will result in shorter working time and limited self leveling properties. If water, excess moisture or sweat gets into the container during mixing it will turn the mix white and it cannot be used.

Pot Life:
The pot life of this product depends greatly on the amount being mixed. Mixing 64 ounces or less, you can expect a pot life of 30+ minutes. Mixing a volume of 64-128 oz you can expect a pot life of about 20 minutes. Please note that once the epoxy is thoroughly mixed it should be poured out onto the surface being sealed, At that point pot life is irrelevant.

Precautionary Statement: 
Part A: Do not handle until all safely precautions have been read and understood. Wash skin thoroughly after handling. Do not eat drink or smoke when using this product. Dispose of contents/container according to local, state and federal regulations
Part B: Obtain special instructions before use. Do not handle until all safety Precautions have been read and understood. Use protective equipment as required. Do not breathe dust/fume/gas/mist/vapor/spray. Wash hands thoroughly after handling. Do not eat, drink, or smoke when using this product. Wear protective gloves/ protective clothing/eye protection/ face protection. In case of inadequate ventilation wear respiratory protection. Use in well ventilated areas. Store Locked Up. Dispose of contents/ containers according to local state and federal regulations.