Royal Water Base Stain

How To use:
1. Clean concrete with super blue to remove any dirt, stains or oily deposits. Be sure that the surface is free of any sealants or coatings.
2. Apply with a plastic pump-up sprayer. Do not let it puddle. Put down in a circular motion.
3. Allow to dry thoroughly. Drying time will vary according to surface conditions and humidity. A second coat of stain may be applied for a darker coat or the addition of a second color.
4. Allow to completely dry again (min. 24 hours), and apply a sealer to enrich and protect your finished products.
5. Waxing your floor is strongly recommended on interior applications to protect and keep your floor looking new.

Clean Up:
Discard brush or application utensil in an appropriate manner, or clean thoroughly with soap and water before product is dry. Dispose of according to local, state and federal regulations.
Precautionary Statement:
Wash hands thoroughly after handling. Do not eat,drink or smoke when using this product. Wear protective glove/protective clothing/eye protection/face protection. Take off contaminated clothing and wash before reuse.
First Aid: 
IF IN EYES: Immediately flood with water for 15 minutes, lifting both eyelids. If irritation persists, Get Medical Attention.
IF SWALLOWED: Do not induce vomiting. Drink two glasses of water and Get Medical Help Immediatley
IF ON Skin: Wash with soap and water. Remove contaminated clothing and launder before reuse If irritation develops, Get Medical Help. 
In Case of Fire:
This product is not flammable.

FOR EMERGENCY HELP
24 HOURS A DAY CONTRACT
INFOTRAC AT 1-800-535-5053